[ Close Window ]
Technote #
Title
12 The Luminex Calibration History file indicates that system calibration was successful but in STarSTation it failed
Date Updated Category
17-08-07 Calibration / Control Verification
Products
[STarStation 2.0] [STarStation 2.3]

When STarStation/Luminex Library completes the process of system calibration a record of the calibration is stored in the following locations:

STarStation 2.0- CalHistory.csv file is C:\Program Files\Luminex\LXRLibrary

STarStation 2.3- C:\Program Files\Luminex\LXR

3) Windows Operating System Registry

STarStation requires write access to the above locations to perform calibrations successfully. If the person performing the calibrations does not possess the necessary Windows operating system access privileges, the record of the calibration attempt may not be stored on the system.

Windows users should confirm that they have Power User or Administrator priveliges, consult your IT department or network administrator if necessary.

A software utility which allows users to check the write access permissions to folders and registry keys can be downloaded from the link below

Download AccessEnum utility (.zip file 51Kb)

Screenshots of how AccessEnum Utility can be used to check the write access status for the registry and folder locations of STarStation are shown below.

(*The drive on which these folders are located is determined by the path chosen during installation of the Luminex library)


[ Close Window ]